SPECIFICATION DOCUMENT – ENGRAVED BRICKS & PAVERS
This document provides specifications for engraved bricks and pavers to ensure consistency, durability, and readability. Builders, contractors, and project managers should tailor this specification to their project requirements by completing the sections marked [Insert here].
1. GENERAL INFORMATION
The project name will be [Insert here], located at [Insert here], and managed by [Insert here]. The supplier for the engraved pavers will be Memorial Products Direct (MPD), which provides delivery across Australia. For orders or enquiries, MPD can be contacted via email at info@memorialproductsdirect.com.au or by phone at 02 4319 4499.
2. MATERIAL SPECIFICATIONS
The engraved bricks and pavers will be e.g. PGH Lasseter Gold – wirecut. The selected size will be [Insert here] (e.g. 230mm x 115mm or 230mm x 230mm). The colour will be [Insert here] (e.g. beige, terracotta, grey). The surface finish will be [Insert here] e.g. smooth or honed or wirecut.
3. ENGRAVING SPECIFICATIONS
All engraving must be a minimum of 4mm deep for longevity and readability. The font style will be [Insert here] (e.g. Arial, Script, Stone Cutter or custom typeface). The minimum letter height must be [Insert here] (e.g. 20mm) to ensure clear visibility. The engraved content will include [Insert here] (e.g. names, dates, locations, directional graphics details). If a logo or symbol is required, it must be supplied as a high-resolution vector file in [Insert here] (e.g. AI, EPS, or PDF format).
4. PAINT FILL REQUIREMENTS
The engraved areas will be filled with black acrylic paint, which must be UV-resistant to prevent fading, peeling, or degradation in outdoor conditions. The paint fill must be a minimum of 300 microns thick.
5. INSTALLATION REQUIREMENTS
Engraved bricks and pavers will be installed using [Insert here] (e.g. concrete-setting, sand bedding, or adhesive fixing). Joint spacing will be [Insert here] (e.g. 5mm) for uniformity. Load-bearing requirements must be considered, particularly for pavers exposed to [Insert here] (e.g. pedestrian foot traffic, vehicular loads, or extreme weather conditions).
6. QUALITY CONTROL & INSPECTION
Before installation, each engraved paver must meet the following quality standards:
The engraving depth must be verified to be at least 4mm.
The paint thickness must be measured to confirm it meets the minimum 300-micron requirement.
The text and symbols must be inspected under various lighting conditions to ensure readability.
The engraved and painted surfaces must demonstrate resistance to UV exposure, moisture, and general wear.
7. ORDERING & CONTACT DETAILS
For customised project requirements, bulk orders, or further consultation, contact MPD at info@memorialproductsdirect.com.au or 02 4319 4499. Engraved bricks and pavers provide a durable, professional, and aesthetically appealing solution for public spaces, commercial projects, and wayfinding applications. This document should be reviewed and adjusted to meet the specific needs of the project.